Call (602)300-3918
For an EPIC Clean
  Affordable Carpet Cleaning
    Tile & Grout Cleaning
 Natural Stone Cleaning & Sealing
  A Clean To Purr About
 

Phoenix Tile Cleaning Services & Professional Carpet Cleaner

How to Shampoo the Carpet

Shampooing a carpet provides a far deeper clean than vacuuming and enhances the carpet’s life. So, how to shampoo the carpet? Read further to know more.

Carpets suffer as a result of our hectic, active lifestyles. The everyday foot traffic and the usual spills and stains ensure that you must clean them frequently. The hot water extractor, a machine built specifically for deep restorative carpet cleaning, can remove deeply ingrained filth and grime to maintain carpets as spotless as the rest of the décor.

Hot water extractors are the gold standard for a deeper, longer-lasting clean among household devices for cleaning carpets with industrial shampoo, including shampooing machines and buffers with solution-moistened pads.

Before You Start

Let’s talk about semantics before we start cleaning. Regarding carpet cleaning, you may hear the phrases “hot water extraction” and “steam cleaning” used interchangeably, but these are two distinct cleaning procedures. Surprisingly, a steam cleaner consumes! —steam in conjunction with shampoo. Steam cleaning, according to critics, may aggravate stains and damage carpet fibers.

Thus it is more commonly suggested for hard surfaces.

In contrast, hot water extraction drives a mixture of heated (but not nearly steaming) water and carpet shampoo deep into the carpet. The solution and filth are subsequently removed from the carpet, resulting in clean fibers and a clean carpet foundation.

How to Shampoo the Carpet

How to Shampoo the Carpet

Before shampooing, remove all furniture from the room, gently vacuum, and spot-treat any stains. Fill the machine with soap and water as directed. Then, run the shampooer across the room zigzag, taking your time. Keep an eye on when the dirty water tank is full. After shampooing, it is good to rerun the machine with cold water and no soap. Allow the carpet to dry thoroughly before repositioning the furniture or stepping on it.

Cleaning the Space or Room

Rearrange all of the furnishings.

If feasible, move all furniture out of the room whenever you shampoo your carpets. If you can’t get it out of the room, shift it all to one side. At the absolute least, relocate any tiny pieces of furniture and clear the space of any additional debris.

It is your choice whether to leave vast pieces of furniture in the room if they are difficult to relocate. If you keep furniture in the room, shampooing will be more complicated since you will have to work around it.

If you cannot move big furniture pieces, lay squares of aluminum foil, woodblocks, or plastic film beneath the legs or base to protect them from water during shampooing.

Thoroughly vacuum the room.

Carpet shampooers include a vacuuming capability, but it is just for sucking up water and microscopic dirt particles. Vacuuming the area will remove bigger debris particles, hair, and dust, preparing the carpet for shampooing. It will help fluff up the rug, making washing more effective.

Because you’re going to the trouble of shampooing, vacuum a little more than usual—straight lines up and down the room, followed by another set that crisscrosses the first.

Look for stains that require pre-treatment before shampooing while you vacuum. Place a sticky note or another marking on the location so you can quickly find it.

Treat any stains you detect.

Spray any stains with a simple carpet stain remover and let the cleaner operate as advised. Blot it up with a moist cloth if suggested. If it says to leave it and then let the shampooer come and get it, do so. Some stains may necessitate the use of anything other than a stain remover.

Because certain carpet shampoos are designed to remove severe stains, you may not need to use a stain remover.

Adding Shampoo to the Shampooer

Check that you understand how the machine operates.

Read the directions for usage if the shampooer is new or if you are renting it. If there are no instructions, at the very least, inspect the machine to determine what components, buttons, and settings are available. Carpet cleaners come in various sizes and shapes, and they all function in different ways. It is critical to understand how yours operates.

Some shampooers operate by being pushed forward like a vacuum, but others need you to move backward while pulling the shampooer with you. Your carpet will not be clean if you use the shampooer in a not intended way.

Look for lessons online to discover the best technique to utilize your shampoo.

Before renting or purchasing a machine, please do some research to see whether it has been confirmed by the CRI (Carpet and Rug Institute), which verifies that the equipment operates successfully and adequately cleans carpets. Because you are unlikely to clean your carpet regularly, use a machine that performs appropriately.

Fill the machine with the amount of water specified.

Some shampooers feature an easily detachable clean water tank, while others have a permanent water tank. Keep an eye on the fill line maximum, and don’t add any more water than it recommends. The bar is there to ensure that the equipment operates correctly.

Follow any hot or cold water recommendations. Because hot water activates soap more effectively, it is frequently preferred.

Pour in the carpet soap.

Choose a soap that is meant to function with the shampooer you have because not all soaps are compatible with all machines. Pour only the amount of soap specified since using more may cause the engine to clog or leave soap scum on your carpet. Check if the soap is introduced to the clean water or a separate compartment on the shampooer.

Read online evaluations of the best carpet washes and examine the shampooer’s directions to see if there is a specific soap for the type of carpet that works best.

Most shampooers can function without soap and still clean carpets to some extent. Therefore it is preferable to use less soap than too much.

Carpet Cleaning AZAZ Carpet Cleaning

Starting the Shampooer

Begin in a corner and work your way out.

Start in the corner of the room, getting the shampooer near the walls. Walk around the corner to the opposite side of the room’s wall. Then, spin around, move the shampooer to a new line that slightly overlaps the first, and walk back towards the wall you began with. Repeat this method around the room.

Shampooers, unlike vacuums, are not designed to be dragged back and forth in a random fashion. The most efficient cleaning approach is to make straight lines across the room.

Slowly pull the machine.

Shampooers take longer to clean than vacuums. They must squirt soapy water into the carpet and then suck it back up. If you draw the shampooer too quickly, it will not be able to suck up all of the unclean water, leaving your carpets damp and muddy. Pull the shampooer at one step per second, give or take.

You may be moving too slowly, and the process takes too long. However, the slower you go, the deeper the machine can clean your carpet.

Take note of the engine sound.

In most shampooers, a float valve in the dirty water tank warns you when the tank is full. When the float valve engages, the motor will make a noticeable shift in sound. When the tank is full, stop immediately, or it will damage the machine. If the device has a visible light or gauge, it may indicate that the filthy water tank is full.

You may also see the machine and keep an eye on the water levels in the clean and dirty tanks. If you’re running low on clean water, take a break.

Before you complete washing the room, you may need to dump the filthy water and replace the clean water many times. It depends on the space’s size, the size of the tanks, and how slowly you go.

If your carpet is unclean or worn, you may need to run the shampooer over it more than once, which may need emptying and refilling the water tank many times.

Dispose of unclean water in the toilet or outdoors.

Shampooers remove dirt and debris that can clog drains in sinks and showers. The toilet has a broader pipe and can manage this stuff, but emptying the water outdoors is typically the best alternative when available.

If you must pour filthy water down the sink or shower drain, do it slowly and with hot water running the entire time. It will assist in keeping the drain from becoming clogged.

Completing the Task

Repeat the shampooing process with cold water and no soap.

While the shampooer is meant to remove all of the soap and unclean water, it will occasionally leave more than you desire. A second run through the room will remove any leftover soap residue and grime. You can go a bit faster on the second pass than you did on the first.

The focus is on cold water since hot water will activate the remaining soap, perhaps causing it to foam again.

Remove your shoes and socks to avoid leaving dirt on the freshly cleaned carpet.

Allow the carpet to dry thoroughly before reintroducing furniture into the space.

Depending on the carpet thickness and room size, it might take six or more hours for the carpet to dry completely. Drying time may be specified by your shampooer. Turn on an overhead fan or position fans and blowers at regular intervals throughout the room to reduce drying time.

If you place furniture back on a wet carpet, it can cause indentations and mildew to grow since there is no ventilation on the damp carpet.

You might want to note that you recently shampooed the carpet so that people don’t tread on the wet carpet.

After each usage, rinse and empty both tanks of the machine.

Dump any remaining water from both water tanks after your final pass. Rinse the filthy water tank altogether to remove any remaining gunk. Emptying the tanks prevents mildew growth and keeps the equipment operating well.

How to Protect Carpet

Selecting the Best Carpet Shampoo

Every carpet wash is unique, and you should not use any carpet cleaning product for a thorough cleaning. Before purchasing carpet shampoo, always read the product label. The appropriate cleaning agent aids in achieving the optimum cleaning for your carpet material, stain type, and carpet extractor.

Products marketed as carpet wash should specify the textiles for which they are intended. Choose a different product if you don’t find this information on the label or the manufacturer’s website.

For the most outstanding results, the shampoos should also specify which brands of machines they are compatible with.

3 Types of Carpet Shampoo

Dry Carpet Shampoo

These shampoos, which are dry or powder-based, are used with a conventional vacuum cleaner. Sprinkle dry shampoo on the carpet before vacuuming, brush it in to activate the particles that remove dirt and odors, and vacuum it up. When it comes to eliminating smells and cleaning difficult organic stains, dry carpet shampoos may be just as successful as regular liquid shampoos.

Traditional Carpet Shampoo

These shampoos work best when combined with a carpet extractor or other carpet-cleaning machine. While suctioning dirt and debris, these devices employ a combination of hot water or steam and liquid detergent. These chemicals are often low-foaming compositions that clean deeper into carpets and rugs when appropriately diluted.

Carpet Shampoo with CRI

The CRI (Carpet and Rug Institute) runs a testing program to identify the best carpet cleaning machines and solutions. Soil removal effectiveness, resoiling, residual moisture, surface appearance alteration, colorfastness, pH level, and optical brighteners have all been evaluated in CRI shampoos.

Tips

If you shampoo your carpets once a year, renting them is better than buying them. If you want to clean your carpets more regularly, purchasing a shampooer is a significant investment.

Warnings

You should not clean some carpets using shampoo. If you have a rug composed of natural fibers, such as wool, hot water might cause the strands to shrink.

Connect with the Professionals

Professional carpet cleaners provide essential benefits for you and your house. They have the appropriate knowledge, abilities, and equipment to remove all types of stains and debris without hurting carpet fibers. They may also supply suitable sanitation solutions to ensure that your house is clear of dangerous substances.

When you hire specialists to clean your carpets, you get them completely clean and significantly increase their lifespan. A longer lifespan allows you and your family to enjoy warm and toasty flooring for a more extended period. Contact a professional carpet cleaning in your area to ensure that your carpets are thoroughly and consistently cleaned.